NZB Road Repair Tape is a practical repair solution for damaged road surfaces, yards, loading areas, driveways, carparks and hardstands where water ingress, surface breakdown, cracking or localised wear needs to be controlled quickly.

The product is supplied as a ready-to-use roll with a removable protective backing. Once the surface is prepared, the tape is rolled into position, the backing is removed, and the repair is compacted into place. The basalt chip surface provides a road-like finish, while the polymer-modified asphalt backing bonds to the existing surface and helps seal against water penetration.

Unlike traditional hot asphalt repairs, Road Repair Tape can be applied cold, with no heating, no mixing and minimal equipment. For rapid access or higher-demand sites, a bitumen emulsion/tack coat may be applied to improve initial bond strength and speed up return-to-service. The manufacturer describes the product as a three-layer system made from removable protective film, high-polymer modified asphalt and graded crushed stone, designed for a simple clean, peel, paste and roll installation process.

Key Benefits

• Cold applied — no heating or hot works required
• Fast installation with minimal tools
• Can be cut, shaped or overlapped to suit the repair area
• Helps seal cracked and worn surfaces against water ingress
• Basalt chip aggregate finish for a trafficable surface
• Suitable for asphalt, chip seal, yards, hardstands and accessways
• Can be trafficked soon after installation once properly compacted
• Ideal for preventative maintenance and temporary-to-medium-term surface repairs
• Useful where excavation, hot asphalt or full reinstatement is not practical

Typical Applications

• Asphalt surface cracking
• Alligator/crocodile cracking
• Yard and hardstand repairs
• Driveway and accessway patching
• Surface sealing around worn or damaged areas
• Preventative maintenance to reduce water ingress
• Temporary or holding repairs before full resurfacing
• Road-edge, depot, loading bay and industrial site maintenance

This is not a structural pavement rebuild. It is a surface repair and sealing product designed to protect the existing pavement, reduce water ingress and extend service life where the base is still reasonably sound. If the pavement is moving, pumping, severely deformed or structurally failed, the underlying issue should be repaired before applying the tape.